The Chil-LED™ lighting solution was developed for use in insulated envelope chilled and frozen environments, where its unique structure achieves substantial benefits from reduced installation costs, lower energy consumption and improved reliability – even when compared with other Industrial LED lights.
Chil-LED Energy Savings
– A 73.3% total system power saving against a metal halide equivalent.
– A 23.6% total system power saving against a well designed LED equivalent.
Chil-LED™ is the ideal LED lighting option for the following applications:
- Chilled and frozen storage
- Temperature controlled production areas
- Food production factories and packing areas
- High care food preparation areas
- Pharmaceutical production and storage areas
- Clean rooms and clean zones
NEW! Chil-LED3, the next generation of Chil-LED.
Chil-LED3 builds on the original concept, but with a simplified, more compact structure, based on a single light source. The electronics and thermal management are still situated outside the chamber, retaining the key advantages of ease of access to primary components, energy efficiency and simple installation. The lit section, which sits flush with the underside of the ceiling panel, is now even more compact and is now IP67 rated.
Although the light emits over 12000 lumens, the lamp head is smaller than a roll of brown packaging tape and is made of smooth white polycarbonate with a silicone glass-free lens.
Installation is now easier than ever – a single hole through the panel serves to mount the luminaire in the ceiling panel and to carry the thermal management system and power cables. Integrated gaskets seal the hole from above and below the panel, ensuring that moisture cannot penetrate the panel.
Most cold stores, frozen warehouses, food preparation areas and other temperature-controlled areas are built using an insulated envelope concept, where an inner structure is built from insulated panels inside a normal industrial building. It is the interior of this structure that is refrigerated and requires lighting.
Starting with the light source, latest generation LEDs have been specified and paired with Inventronics LED drivers, to give reliable, efficient, high quality light. A selection of interchangeable lenses can be used to tailor beam angles as required.
Chil-LED™ uses a unique heat pipe system to channel heat generated by its high-power LEDs out through the ceiling of the cold store before it even enters the cold area. And because the heat never enters the cold store, it doesn’t need to be extracted again. That saves energy and money.
The system that carries the heat also carries the power from the LED driver modules to the LEDs, which means that all of the wiring and control gear is situated outside the cold store.
Mounting the Chil-LED™ fitting couldn’t be easier. There are no additional brackets or chains. The system that carries the heat and power through the ceiling panels also serves as the mounting system. It even incorporates an adjustable collar, which accommodates different insulated panel thicknesses, from 50mm up to 200mm. Watch the installation demo video under the video resources tab.
Check out our Olivewood NZ Linkedin Showcase Page to keep up with the latest on Olivewood at Eurotec www.linkedin.com/company/olivewood-nz